MyRadAgent
Home › Tools › Genant vertebral fracture grade calculator

Genant vertebral fracture grade calculator

Enter the three vertebral body heights, and optionally a reference height from the nearest normal vertebra, to get the percent height reduction and the Genant semiquantitative grade. The grade table and the common mimics are below.

Need the whole report too? Type a few findings and get it written ↓

Anterior height (mm)
Middle height (mm)
Posterior height (mm)
Reference height (mm, optional — nearest normal vertebra; needed to detect a crush deformity)
Formula. Height reduction = (1 − lowest height / reference height) × 100. Without a reference, the tallest of the three heights of the same vertebra is used. The lowest height names the deformity: anterior = wedge, middle = biconcave, posterior = crush.
Draft the full report from this finding — free

A sample dictation is ready below. Press generate, or type your own findings and end with “otherwise normal” to have the rest written out. No signup.

Now try it on your own case.

100 free reports over 14 days. No card, nothing to install.

Start your free trial →

Please leave out patient identifiers. Text is de-identified before the AI sees it and is not stored. Demo output is not for clinical use.

Genant grades

GradeHeight reduction
Grade 0: normalLess than about 20% height reduction
Grade 1: mild fractureApproximately 20-25% height reduction
Grade 2: moderate fractureApproximately 25-40% height reduction
Grade 3: severe fractureMore than 40% height reduction

Caveats

Related

Source. Genant HK, et al. Vertebral fracture assessment using a semiquantitative technique. J Bone Miner Res 1993;8(9):1137-1148. View on PubMed

Worked example

Case. A vertebral body measures 15 mm anteriorly, 21 mm in the middle and 24 mm posteriorly.

  1. The anterior height is the lowest, so the deformity is a wedge.
  2. Height reduction = (1 − 15 / 24) × 100 = 37.5%.

Result. 37.5% lies in the 25-40% band: Genant grade 2, moderate wedge fracture.

Related calculators

Frequently asked questions

How is a vertebral fracture graded with the Genant method?

The Genant semiquantitative method grades each vertebra from T4 to L4 by its reduction in anterior, middle or posterior height compared with the expected height: grade 0 normal, grade 1 mild (approximately 20-25%), grade 2 moderate (approximately 25-40%) and grade 3 severe (more than 40%). The lowest height also names the shape: wedge, biconcave or crush.

How do you calculate percent vertebral height loss?

Divide the lowest measured height of the vertebral body by the expected height, subtract from one and multiply by 100. The expected height is usually the posterior height of the same vertebra for a wedge or biconcave deformity, or the height of an adjacent normal vertebra for a crush deformity.

Is every reduction in vertebral height a fracture?

No. Schmorl nodes, Scheuermann change, developmental short vertebral height and degenerative remodelling can all reduce height without a fracture. Genant grading is a visual method applied by an experienced reader; the measured percentage supports that reading rather than replacing it.

This calculator, written into your report for you

MyRadAgent’s radiology AI drafts the full report and applies this guideline automatically, with the category and follow-up in the impression. Free trial runs in the browser: 100 reports over 14 days, no card, no IT ticket.

Try it on a report → or try it here first — no signup ↑
This is a reference implementation of a published guideline, for use by qualified clinicians. It does not account for patient-specific factors and is not a substitute for clinical judgment or a formal radiology consultation. See our full disclaimer.

BI-RADS, TI-RADS, LI-RADS, PI-RADS, O-RADS, Lung-RADS, CAD-RADS, NI-RADS and ACR are registered trademarks of the American College of Radiology. They are used here only to identify the published systems these tools implement; MyRadAgent is not affiliated with, sponsored by or endorsed by the ACR.